User Interface / Device Configuration - Nailor ELECTRA-FLO G5 Operation And Maintenance Manual

3.1 Start-Up / Operation - continued

3.2 User Interface / Device Configuration

3/21 IOM-ELECTRA-FLO-INST
Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.
Status Icons
The following icons will be displayed at the top of the normal
operating screen whenever the function is active. Refer to the
alert code table on page 30 for additional status codes.
Transmitter communicating normally on the BACnet or MODBUS
Network
Send/Receive arrows flashing indicates the sensor(s) and
transmitter are
Communicating normally
The Airflow G5 transmitter is fully field configurable. The
transmitter is configured using the display and 4-button
membrane keypad. Individual key functions are described
below.
ENT: Enters menu item from main or service menu; moves
ENT
cursor to next item below when in sub-menu
ESC
ESC: Exits current page or sub-menu item
UP Arrow: Toggles between display pages on dual channel
UP
meters. In the menu mode, it moves cursor "up" through main
and service menus and changes character in sub-menu items.
DN DOWN Arrow: Moves cursor "down" through main and service
menu and changes character in sub-menu items.
Device configuration options are provided on individual display
pages shown in the main menu table below. A separate service
menu is also provided for diagnostic and product information.
The true dual channel main, service and network configuration
menus are shown on the next page in separate tables.
Page 11