Table of Contents
Advertisement
Section 3.0: Installation:
3.1 Start-Up / Operation
TOTAL SYSTEM SCAN
1
2
3
9
10
11
17
18
19
25
26
27
EXPECTED
2
MISSING
0
Total Flow
Velocity
Temperature
Sys1 Flow
Sys1 Flow
Sys1 + Sys2
Sys1 - Sys2
Page 10
Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.
4
5
6
7
8
12
13
14
15
16
20
21
22
23
24
28
29
30
31
32
EXPECTED
2
DISPLAYED
0
ESC - LEAVE
fx
0
SCFM
0.0
SFPM
74.7
F
Custom ID
0
75.6F
ACPM
Onicon
0
74.7F
ACPM
0
75.6F
ACPM
Onicon
0
74.7F
ACPM
After power and signal wiring has been verified in accordance
with Section 2.3, activate the 24 VAC / VDC power source.
Start-up
Press the power button located in the lower left corner of the
display. The display will show a bar graph as the program
loads. Once the program is loaded, the transmitter will scan for
sensors and display their status. The normal operating screen
will then be displayed.
Default Display Screen
The display screen provides three lines of process data. The
data shown is field configurable. The default configuration
indicates flow, velocity and temperature.
A field configurable Custom ID is also shown at the bottom of
the screen.
Default Dual Channel Display Screens
The true dual channel version of the Airflow G5 transmitter
has two display screens for process data. Sys1 Flow and Sys2
Flow are provided on the first screen. Sys1 Flow + Sys2 Flow
and Sys1 Flow - Sys2 Flow are provided on the second screen.
The Up arrow is used to toggle between the screens. The field
configurable Custom ID is also shown.
3/21 IOM-ELECTRA-FLO-INST
ENT
DN
Advertisement
Table of Contents
