Directset Menu - American Dynamics SpeedDome Ultra VII EIS Operator's Manual Supplement

2. Use the joystick to highlight a desired Pattern
number (1-16). Press Focus Far to continue.
3. Pan/tilt/zoom the dome as desired for the
Pattern.
4. Execute the keyboard's Pattern save
command to save the Pattern.
Running 16 Patterns
When a dome is configured for 16 Patterns,
running a Pattern requires displaying the Pattern
Select screen (Figure 19). Follow the steps below
to run a Pattern.
1. Enter the appropriate keyboard command to
run Patterns 1, 2, or 3. The Pattern Select
screen appears.
2. Move the joystick to highlight the desired
Pattern number (1-16) to run.
3. Press Focus Far to select. The Pattern Select
screen disappears and the Pattern runs.

DirectSet Menu

The DirectSet Menu provides easy access to
commonly used SpeedDome Ultra VII with EIS
features when used with compatible controllers.
This allows you to change or activate features
without starting the dome configuration menu. See
the following examples of the DirectSet menu
(Figure 20).
SPEEDDOME ULTRA VII EIS DAY/NIGHT CAMERA DOME CONFIGURATION UTILITY
OPERATOR'S MANUAL SUPPLEMENT
Figure 20: Day/Night Camera Dome DirectSet
Menu (4 screens)
0 TOGGLE DIRECT SET MENU
1 DOME CONFIG MENU
2 AUTO IRIS/AUTO FOCUS
3 FLIP
4 PEEL PATTERN
10 NIGHT MODE
11 DAY MODE
12 AUTO DAY/NIGHT MODE
15 SMOOTH SCAN
16 STEPPED SCAN
FOCUS FAR = next page
17 RANDOM SCAN
20 DOME INFORMATION
48 EIS OFF
49 EIS 5 HZ
50 EIS 10 HZ
51 SEQUENCE 1
52 SEQUENCE 2
53 SEQUENCE 3
54 SEQUENCE 4
55 SEQUENCE 5
Use FOCUS to select next page
56 SEQUENCE 6
57 SEQUENCE 7
58 SEQUENCE 8
59 SEQUENCE 9
60 SEQUENCE 10
61 SEQUENCE 11
62 SEQUENCE 12
63 SEQUENCE 13
64 SEQUENCE 14
65 SEQUENCE 15
Use FOCUS to select next page
66 SEQUENCE 16
FOCUS NEAR = previous page
To access a feature on the menu, enter the
number and press the DirectSet button (varies by
controller). Table 1 provides a description of the
available options.
8 of 15
8200-0184-13, REV. A