Status - VTech VSP600 Administrator And Provisioning Manual

Status

Use the status menu to verify network settings and begin troubleshooting if network
problems or account registration issues affect operation.
You can also find the software version of the handset and base station on the
Product Info screen, which is available from the Status menu.
To view the Status menu:
1. When the handset is idle, press MENU/SELECT.
2. On the Main menu, press  or  to highlight Status, then press
MENU/SELECT. The Status menu appears.
Status
Network
Line
Product info
BACK ENTER
3. On the Status menu, press  or  to highlight the desired menu, then press
MENU/SELECT.
The available status menus are listed in the following table.
Menu
Network
Line
Product info
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
VSP600/VSP601 Administrator and Provisioning Manual
Information listed
 IP address
 DHCP status (Enabled/Disabled)
 Subnet Mask
 Gateway IP address
 DNS server 1 IP address
 DNS server 2 IP address
Lines and registration status. On the Line menu, highlight and
select the desired line to view detailed line status information:
 Line status (Registered/Not registered)
 Account display name
 Account User ID
 Registrar Server IP address
Shows the product info for the handset or base station. Select
Handset or Base to view the:
 Model number (Handset only)
 Serial number (Handset only)
 Software version
 V-Series
 Hardware version
11 Using the Handset Menu