Handset Settings; Account Assignments - VTech VSP600 Administrator And Provisioning Manual

Public SIP port
Min Public RTP port
Max Public RTP port

Handset Settings

The Handset Settings allow you to configure account assignments and names for the
cordless handsets that are registered to the base station. For more information on
registering cordless handsets, see the VSP600/VSP601 User Guide.
The network settings are also available as parameters in the configuration file. See
"hs_settings" Module: Handset Settings on page 80.

Account Assignments

The Account Assignments table lists the maximum of six handsets, even if there a
fewer handsets registered. The registration status of currently registered handsets
does not affect what is listed on this table.
The table always displays the maximum six accounts, even if there are fewer SIP
accounts enabled.
If you have not entered any unique handset names yet, then the default name of
"HANDSET" appears.
On the Account Assignments table, you can select which accounts will be available
for both incoming and outgoing calls on each handset.
The handset will first attempt to use the account you select under Default when
going off-hook.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
VSP600/VSP601 Administrator and Provisioning Manual
Enter the router port number being used for SIP. This
setting identifies the router's port to the VoIP server.
Enter the lower limit of the public RTP port range.
Enter the upper limit of the public RTP port range.
35 WebUI: System