Using The Webui - VTech VSP600 Administrator And Provisioning Manual

Using the WebUI

The Web User Interface (WebUI) resides on the base station. You can access it using
an Internet browser. After you log in to the WebUI, you can configure the base
station and handsets on the following pages:
 System
o
o
o
o
o
 Network
o
o
 Contacts
o
o
 Servicing
o
o
o
o
o
o
o
The WebUI also has a System Status page, where you can view network status and
general information about the base station and handsets. Some of the information on
the status page is also available on the Status menu available on the handset.
To access the WebUI:
1. Ensure that your computer is connected to the same network as the base station.
2. Find the IP address of the base station:
a. On a handset, press MENU.
b. Press  to highlight Status, and then press SELECT.
c. With Network highlighted, press SELECT.
d. On the Network status screen, note the IP Address.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
VSP600/VSP601 Administrator and Provisioning Manual
SIP Account Management
Call settings
User Preferences
Signaling Settings
Handset Settings
Basic Network Settings
Advanced Network Settings
Base Directory
Blacklist
Reboot
Time and Date
Firmware Upgrade
Provisioning
Security
Certificates
System Logs
The Network status screen appears.
Network
IP Address:
10.88.51.133
DHCP:
Enabled
BACK OK
18 Using the WebUI