Set Time And Date - American Dynamics MicroPower EP AD1650B Programming And Operating Instructions

MENU PROGRAMMING

SET TIME AND DATE

The SET TIME AND DATE menu permits setting the date
format, date, time, and day of the week for on-screen displays.
S E T T I M E A N D D AT E
D AT E F O R M AT - M M - D D - Y Y
D AT E - 0 9 - 2 0 - 9 4
T I M E - 1 6 : 5 7 : 2 6
D AY O F W E E K - T U E
P R E V I O U S M E N U
DATE FORMAT - Selects the system date format for display.
Note that the presentation of the date in the next menu line
(DATE) changes to correspond to the format selection.
1. Place the cursor on the DATE FORMAT line.
2. Press the ACK key to cycle through each date format.
Press the NEXT key to accept the displayed selection.
or
Enter the number which corresponds to the desired format
and press the ACK key.
1 - MM-DD-YY
2 - DD-MM-YY
3 - YY-MM-DD
DATE - Displays the date in the format selected (above).
1. Place the cursor on the DATE line.
2. Enter the first two digits of the date based on the format
selected and press the ACK key.
3. Enter the second pair of digits based on the format selected
and press the ACK key.
4. Enter the third pair of digits based on the format selected
and press the ACK key.
Note: Pressing the ACK key without entering a number
results in a "00" entry for that item.
S Y S T E M
1 S E T T I M E A N D D AT E
2 S E T S Y S T E M TO U R S
3 S E T S Y S T E M S A LV O S
4 S E T E V E N T T I M E R S
5 S E T A L A R M C O N TA C T S
6 M O N I TO R S TAT U S
R E T U R N M A I N
Date Example: Using the MM-DD-YY format, enter the date
09-30-94.
Enter 09 on the keypad and press the ACK key.
Enter 30 on the keypad and press the ACK key.
Enter 94 on the keypad and press the ACK key.
TIME - Displays the time, in 24-hour format, as HH:MM:SS
(hour:minute:second).
1. Place the cursor on the TIME line.
2. Enter the hour (HH) and press the ACK key.
3. Enter the minutes (MM) and press the ACK key.
4. Enter the seconds (SS) and press the ACK key.
Time Example: Set the time to read 14:17:28.
Enter 14 on the keypad and press the ACK key.
Enter 17 on the keypad and press the ACK key.
Enter 28 on the keypad and press the ACK key.
DAY OF WEEK - Displays the day of the week, SUN - SAT.
The day of the week must be set properly before programming
Event Timers, page 4-10.
1. Place the cursor on the DAY OF WEEK line.
2. Press the ACK key to cycle through the days of the week.
Press the NEXT key to accept the displayed selection.
Enter the number which corresponds to the desired day of
the week and press the ACK key.
PREVIOUS MENU returns to the SYSTEM menu, page 4-3.
See page 4-3 for cursor movement instructions.
4-4
Note: Enter time in 24-hour format.
or
1 - SUN 4 - WED
2 - MON 5 - THR
3 - TUE 6 - FRI
7 - SAT
AD1650B