Table of Contents
Advertisement
MENU PROGRAMMING - SYSTEM MENU
SET TIME AND DATE
Use the SET TIME AND DATE menu, below, to set the date
format, date, time, and day of the week for on-screen displays.
SET TIME AND DATE
DATE FORMAT - MM-DD-YY
DATE - 09-20-91
TIME - 16:57:26
DAY OF WEEK - TUE
PREVIOUS MENU
DATE FORMAT - Three formats exist for the Date:
1 - MM-DD-YY
2 - DD-MM-YY
3 - YY-MM-DD
1. Place the cursor on the DATE FORMAT line.
2. Use the ACK key to cycle through each date format. Press
the NEXT key to accept the displayed selection.
or
Enter the number which corresponds to the desired format
and press the ACK key.
Note that the presentation of date information in the next menu
line (DATE) corresponds to the format selected.
DATE - Displays the date in the format selected (above).
1. Place the cursor on the DATE line.
2. Enter the first two digits of the date, based on the format
selected, and press the ACK key.
3. Enter the second pair of digits based on the format selected.
Press the ACK key.
4. Enter the third pair of digits based on the format selected.
Press the ACK key.
Pressing the ACK key without entering a number results in a
"00" entry for that item.
S Y S T E M
1 S E T T I M E A N D D AT E
2 S E T S Y S T E M TO U R S
3 S E T S Y S T E M S A LV O S
4 S E T E V E N T T I M E R S
5 S E T A L A R M C O N TA C T S
6 M O N I TO R S TAT U S
R E T U R N M A I N
Example: Using the MM-DD-YY format, enter the date
09-30-91.
Enter 09 on the keypad.
Press the ACK key.
Enter 30 on the keypad.
Press the ACK key.
Enter 91 on the keypad.
Press the ACK key.
TIME - Displays the time, in 24-hour format, as HH:MM:SS
(hour:minute:second).
1. Place the cursor on the TIME line.
2. Enter the current time similar the to date entry procedure,
starting with hour (HH).
Press the ACK key after each entry.
Example: Set the time to read 14:17: 28:
Enter 14 on the keypad
Press the ACK key
Enter 17 on the keypad
Press the ACK key
Enter 28 on the keypad
Press the ACK key
DAY OF WEEK - Displays the day of the week.
1. Place the cursor on the DAY OF WEEK line.
2. Use the ACK key to cycle through the days of the week.
Press the NEXT key to accept the displayed selection.
Enter the number which corresponds to the desired day of
the week and press the ACK key.
PREVIOUS MENU - Returns to the SYSTEM menu.
See page 4-3 for cursor movement instructions.
4-4
or
1 - SUN
4 - WED
2 - MON
5 - THR
3 - TUE
6 - FRI
7 - SAT
Advertisement
Table of Contents
