Time/Date Menu; Programming The Time And Date - American Dynamics LT Installation And Operation Instructions Manual

Time/Date Menu

The Time/Date menu is used to program the time and date, and to select whether daylight
saving time should be implemented in the system.

Programming the Time and Date

To program the time and date, follow the steps below:
1. In the Supervisor menu or Administrator menu, select the Time/Date Menu option.
2. In the Time/Date menu, move to the Time format option.
3. Use the right joystick command to select 24H or 12H. Note that in 12 hour format,
a.m. times are displayed 09.54 AM and p.m. times are displayed 09.54 PM.
4. Move to the Date format option.
5. Use the right joystick command to select mmddyy, ddmmyy or yymmdd. The default
is mmddyy.
6. Move to the Set time option. The hours parameter is automatically selected.
7. With the hours parameter selected, use the number keys to enter the desired hour in
a two digit format, i.e. 02, 13, etc. Advance the cursor to the minutes parameter
using the right joystick command and then use the number keys to input the minutes.
The time in this field should always be entered in 24 hour format regardless of how
the time will actually be shown on-screen
8. Move to the Set date option.
9. Use the numeric keys to enter the day, month and year. Use the right joystick command
to move between each part of the date. The date should be entered in the format that
is currently selected in the Date format field.
10. When the required changes have been made, select the Apply new time and date
option.
11. To leave the menu, select the Return to Menu option.
1 Time/Date Menu
1.1 Time format :12H
1.2 Date format :mmddyy
1.3 Set time :12:00:00
1.4 Set date :21:06:02
1.5 DST :FORWARD
Apply new time and date
Return to Menu
15
Matrix Installation and Operation