Advertisement
Installation (cont.)
Lift the panel to determine the proper height and placement. It is recommened to aim
the top horizontal body jet to the chest area for optimal showering experience.
200mm
7.87"
1"
Decor Star
4. Mark the positions of the 2 brackets on the
wall and set a side the panel. (NOTE: The
distance between the two brackets should be
200mm or 7.87")
5. Using a drill with a tile bit, drill the hole slowly into
the tile. Do not drill into any piping or wiring in the
wall. Insert the anchors into the wall. (NOTE: Before
installing the wall anchors, use a small piece of paint-
ers tape or masking tape over the drill area. This will
prevent damages to the tile)
6. Secure the mounting brackets to the wall.
8
PL-019-SS Rev. A1
122015
Advertisement
