Advertisement
Installation (cont.)
A
B
C
D
A
Decor Star
10. After the excess hose has been trimmed. First slip
compression nut (C) and the compression ring (B)
onto the PVC hose (D). Insert the elbow connector
(A) into the hose. Push the compression ring (B) up
toward the end of the hose as far as possible. Tighten
the compression nut (C) (NOTE: Do not over tighten
the nut as it may damage the seal and causes leaks)
11. Wipe the surrounding surface around the pipe free
of dirt and debris. Peel off the adhesive backing of the
cover base (A) and press it firmly against the wall to
ensure a tight bond. Apply some PTFE tape on the
pipe threading. Connect the main water supply hose
assembly to the pipe. (NOTE: Do not over tighten
the nut as it may damage the seal and causes leaks)
Once the connection is made, install the cover over
the elbow connector.
B
12. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (NOTE: Install the rubber washer to
prevent leak.)
10
PL-019-SS Rev. A1
122015
Advertisement
