Table of Contents
Advertisement
ATTENTION!
After cleaning, check the gasket at the bottom end of the riser pipe. If it is
not fitted correctly, is missing or is hard, maintaining the right position of
the riser pipe in the heating bowl may be impossible, which in turn may
negatively influence the operation of the appliance.
Weekly cleaning
Heating Bowl
The heating bowl in the bottom of the appliance must be thoroughly cleaned every
week, especially in case of daily use of the appliance.
There is a scraper for cleaning the heating bowl in the package of the appliance.
NOTE!
Always use the enclosed cleaning scraper.
1. Put the steel wool cloth soaked in soap or
thin dishcloth on the heating bowl.
2. Then introduce the narrow end of the
EN
cleaning scraper into the heating bowl.
3. Clean the heating bowl through repeatedly
turning the cleaning scraper inside out and
to the left and right.
The heating bowl is clean, when the metal
shines.
4. After cleaning, rinse the water tank thoroughly to remove all residuals of soap
and cleaning agents.
18 / 24
Cleaning
A190149
Advertisement
Table of Contents
