DeFelsko PosiTector UTG Manual page 25

Medidores de espesores ultrasónicos con escáner detector de fallas o defectos UTG-C3-E POSITECTOR ADVANCED DEFELSKO manual ingles www.viaindustrial.com
Advanced models
batches. The Memory Menu includes the following options...
New Batch
Closes any currently opened batch and creates a new batch name
using the lowest available number. For example, if only Batch 1
and Batch 3 exist, then Batch 2 would be created and made the
current batch. The
displayed. Each measurement will be displayed and stored into
this new batch. On screen statistics are immediately updated with
each measurement. New batch names are date stamped at the
time they are created. Each reading is also data/time stamped.
Shortcut: When a batch is open, press (+) to create a new batch
current batch
Mean (average)
Maximum
measurement
NOTES:
•
Remove the last reading from the current open batch by
pressing (-).
•
Calibration adjustments cannot be made if readings are
stored in memory.
•
If memory is ON, continuous measurements can be taken but
results will not be stored in memory.
Medidores de espesores ultrasónicos con escáner detector de fallas o defectos UTG-C3-E POSITECTOR ADVANCED DEFELSKO manual ingles www.viaindustrial.com
store 100,000 readings in up to 1,000
icon appears and basic statistics are
21
# readings in current batch
Standard Deviation
Minimum
measurement
Last reading