Changing The Fuse; Replacing The Led Module; Checking The Function Of The Led Illumination - Leica M220 F12 User's Manual & Installation Manual

Care and maintenance

10.4 Changing the fuse

WARNING
Risk of death from electrical shock!
Disconnect the power cable from the instrument power
X
socket before changing fuses.
The fuses are located in a fuse holder (2) in the instrument power
socket.
Using a screwdriver, pry out the fuse holder (2), then pull it all
X
the way out by hand.
Change out the fuses (1).
X
Use only 6.3 AH time-lag fuses.
Replace the fuse holder (2) and press it in all the way using your
X
hand.
32
1
2
Leica M220 F12 / Ref. 10 716 922 / Version 03

10.5 Replacing the LED module

CAUTION
Burn hazard!
The LED module get very hot.
Check that the LED module have cooled before you
X
remove it.
The Leica M220 F12 does not have a built-in auxiliary lamp.
A replacement LED module should always be kept at hand. If
an LED burns out, another spare LED module should be
purchased to be kept at hand by the user.
Use only Leica original replacement LED module.
The replacement of the LED module of the illumination is
described in detail in the replacement instructions that
accompany the LED replacement module (10 448 374 Leica
order number).
10.6 Checking the function of the LED
illumination
See chapter 7.13.1.