Operation
Changing wheel counterweight at D axis
If the Leica M500 OH3 cannot balance out the hardware used, a
wheel counterweight must be added or removed.
This is also signalled by the LED (Item 5, Page 10) for balancing
the D axis.
Caution
Risk of injury by falling wheel counterweight or cover!
➩During the change, ensure that your feet are not under
the wheel counterweight or the cover.
➩Lock the Leica M500 OH3 (see Page 14).
➩Turn down cover (1) of axis.
➩Screw off hex nut (3).
➩Add or remove wheel (2).
➩Screw on hex nut (3).
➩Screw cover (1) back on.
30
1
2
3
Leica M500 OH3 / Ref. 10 711 894 / Version -