Cleaning the micro pressure valve
• When you clean the micro-pressure valve, remove it from the lid –
and open it by rotating it in the direction "open" –
After cleaning it, wipe it dry and connect the two parts together and
rotate it in the direction of "close", then put it back on the lid of the
multicooker –
Cleaning and care for the other parts of the appliance
• Clean the outside of the multicooker – fig.22, the inside of the lid and
the cord with a damp cloth and wipe dry. Do not use abrasive products.
• Do not use water to clean the interior of the appliance body because it
can damage the heat sensor.
fig.20a
and 20b.
fig.17
fig.18a
and 18b.
EN
29
Need help?
Do you have a question about the ActiCook & Stir RK901B51 and is the answer not in the manual?
Questions and answers