Package Contents; Installation Requirements; Panel Description - Techly IDATA VGA-WL200 User Manual

EN
INTRODUCTION
This transmitter extends VGA signal wirelessly from source device
to display device up 200 meters with the advanced application of
HDBitT transport protocol and wireless technology. It requires no
cables between sender (TX) and receiver (RX) which makes the
installation easy and clean.
Note: Transmission distance will be different due to the environment.
Wall, brick or glass will shorten the signal cover range or cause big
signal loss.
FEATURES
• Transmit VGA signal from source device to display device up to 200
m wirelessly
• Support wireless audio transmission
• Support RGBHV signal input
• No cable between sender (TX) and receiver (RX)
• Easy and clean installation

PACkAGE CONTENTS

• VGA EXTENDER sender TX x 1pc
• VGA EXTENDER receiver RX x 1pc
• Power supply DC5V/3A x 2pcs
• 3.5mm Audio cable x 1pc
• User manual x 1pc
Note: above accessories are contented in the regular package for
the kit with transmitter and receiver. If buy VGA Extender TX or VGA
Extender RX separately, the package contents would be different.

INSTALLATION REqUIREMENTS

1. VGA source device (computer graphics card, DVD, PS3, HD
monitoring equipment, etc..)
2. VGA display device like SDTV, HDTV, projector with VGA port

PANEL DESCRIPTION

1. VGA EXTENDER TX (Sender)
8
VGA WIRELESS EXTENDER
7 8