Subscribe to Our Youtube Channel
Related Manuals for Innova 3.0
Summary of Contents for Innova 3.0
- Page 1 INSTRUCTIONS FOR INNOVA 3.0 ATOMIZER 1. Characteristics Instructions 1 di 4 cod. N420000A - 03...
- Page 2 30 mm. 5. Water mist connections The atomizer 3.0 already has a 80 mm diameter fitting for ejecting atomized water. This connection can be extended with normal pipe (80 mm diameter). Ensure that these extensions have a slope of at least 3 ° to let in the atomizer any condensate water in the tube and that the output connection is free from any obstacles for a distance of 50 cm.
- Page 3 The atomizer goes on standby automatically if the water level falls below the minimum level and automatically activates the heating cable (optional) when the water temperature falls below 3 ° C. 3.0 has a CP contact to interface with the ..2.0 air conditioner when there is any failure or malfunctions.
- Page 4 This procedure is used to avoid that during the summer season, with the opening of the drain valve of the drain pan, the condensate itself is poured all in the 3.0 nebulizer installed under the appliance. To activate this function: Press the cooling mode key on the display of the ..2.0 for 15 sec.
Need help?
Do you have a question about the 3.0 and is the answer not in the manual?
Questions and answers