Download
Share
Print this page
Degelman strawmaster 7000 Operator's Manual/Parts Catalog
  1. Manuals
  2. Brands
  3. Degelman Manuals
  4. Farm Equipment
  5. STRAWMASTER 7000
  6. Operator's manual/parts catalog

Degelman strawmaster 7000 Operator's Manual/Parts Catalog

30', 50', 62', 70' & 82' harrow drawbars
Hide thumbs Also See for strawmaster 7000:

Advertisement

Quick Links

Download this manual
OPERATOR MANUAL
& PARTS CATALOG
142628 v1.6
STRAWMASTER 7000
D E G E L M A N
I N D U S T R I E S
L T D.
B O X
8 3 0 - 2 7 2
I N D U S T R I A L
D R I V E ,
30', 50', 62', 70' & 82'
R E G I N A ,
S K ,
C A N A D A ,
S 4 P
3 B 1
F A X 3 0 6 . 5 4 3 . 2 1 4 0
P H 3 0 6 . 5 4 3 . 4 4 4 7
Serial Numbers up to 7139
1 . 8 0 0 . 6 6 7 . 3 5 4 5
D E G E L M A N . C O M

Advertisement

loading
Need help?

Need help?

Do you have a question about the strawmaster 7000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Degelman strawmaster 7000

Summary of Contents for Degelman strawmaster 7000

  • Page 1 OPERATOR MANUAL & PARTS CATALOG 142628 v1.6 STRAWMASTER 7000 D E G E L M A N I N D U S T R I E S L T D. B O X 8 3 0 - 2 7 2...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS - OPERATORS SECTION Introduction Safety Safety Information Operation Overview / Preparation Hook-Up Convert to Field Position Suggested Tine Angle Settings Height Adjustment Transporting / Storage Service & Maintenance Service Repair Troubleshooting TABLE OF CONTENTS - PARTS SECTION Warranty IMPORTANT: D E G E L M A N...

  • Page 5: Introduction

    Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your Degelman Dealer if you need assistance, information, or additional copies of the manual. OPERATOR ORIENTATION - The directions left, right, front and rear, as mentioned throughout the manual, are as seen from the tractor drivers’...

  • Page 6: Safety

    CAUTION: Indicates a potentially hazardous situation CAUTION that, if not avoided, MAY result in minor or moderate injury if proper practices are not taken, or, serves as a reminder to follow appropriate safety practices. 142628 - Strawmaster 7000 (27-September-2013)
  • Page 7 GENERAL SAFETY YOU are responsible for the safe operation and 1. Read and understand the Operator’s ® maintenance of your Degelman Strawmaster Manual and all safety signs before YOU must ensure that you and anyone else who operating, maintaining or adjusting ®...
  • Page 8 9. Clean all reflectors, lights and the SMV sign 7. Always relieve pressure before disconnecting or before transporting on a highway or public working on hydraulic system. road. Be sure to check with local highway authorities and comply with their lighting requirements. 142628 - Strawmaster 7000 (27-September-2013)
  • Page 9 2. Do not attempt to mount a tire unless you have the proper equipment and experience to do the job. 3. Have a qualified tire dealer or repair serviceman perform required tire maintenance. 142628 - Strawmaster 7000 (27-September-2013)

  • Page 10: Operation

    3. Swing Arm evenly as it is released. 4. Wing Beam When stood vertically 5. Centre Beam the tines will rake flax 6. Truss Beam residue. 7. 10’ Harrow Section 142628 - Strawmaster 7000 (27-September-2013)
  • Page 11 • Stay well back from machine when operating. damaged tines. If tines are 16 in. or less in Keep others away. length, they should be replaced. (New tine length: 26 in.) See section on Tine Replacement. 142628 - Strawmaster 7000 (27-September-2013)

  • Page 12: Hook-Up

    • Be sure to match the pressure and return line to one valve bank. 9. Raise the hitch jack and rotate it 90º to place in its stowed position. 10. When unhooking from the tractor, reverse the above procedure. 142628 - Strawmaster 7000 (27-September-2013)

  • Page 13: Convert To Field Position

    It should then Hair Pin snap shut and be fully engaged. Field ATTENTION Before driving forward make sure both latches have fully engaged or serious 30’ damage to the machine will result. 142628 - Strawmaster 7000 (27-September-2013)
  • Page 14 • A second pass may be required in extremely Strawmaster 7000. The Valmar Airflow Model 3255 heavy straw conditions. (Work the second pass at can be used with the 50’, 70’ & 82’ Strawmasters.

  • Page 15: Height Adjustment

    Fine Adjustment pins and retainers. Lower the trailer hitch. option also includeds a fine adjustment rod on the Stand back to check if the trailer hitch is level. If top endwheel linkage. not, repeat procedure. 142628 - Strawmaster 7000 (27-September-2013) -11-...
  • Page 16 • Always use hazard flashing lights on tractor. • Travel at a safe speed. Use care when making corners or meeting traffic. • Under no circumstances should RIDERS there ever be riders while the Strawmaster® is in transport. 142628 - Strawmaster 7000 (27-September-2013) -12-...

  • Page 17: Service & Maintenance Service

    Sidewind Jacks Harrow Sections (Manual adjustable models) End Wheel Cylinder (x2) or Sidewind Jack (x2) Center Beam Pin & Cross Joints (x2) Hub - Trailer Wheel (x2) Hub-Transport Wheel (2x) Upper & lower wheel plates (x2) Hub-End Wheel (2x) 142628 - Strawmaster 7000 (27-September-2013) -13-...
  • Page 18 Hydraulic Fitting Torque* Size lb.ft (N.m) (46) 75 (100) 90 (122) *The torque values shown are based on lubricated connections as in reassembly. 142628 - Strawmaster 7000 (27-September-2013) -14-...

  • Page 19: Repair

    10. Pump grease into hub through grease fitting Endwheel Tires: until lubricant can be seen from dust seal. 9.5L x15 - 6 PLY 36 PSI (248 kPa) -or- 9.5L x15 - 8 PLY 60 PSI (414 kPa) 142628 - Strawmaster 7000 (27-September-2013) -15-...
  • Page 20 6. Install new seals and replace damaged parts with new components. COMMON DEGELMAN CYLINDER COMPONENTS Piston Barrel Lock Nut Lock Ring O-ring End Cap Piston Seals (5 part) O-ring Wear Ring Rod Seal Rod Wiper Seal Assembly Shoulder Bolt Assembly Flat Washer 142628 - Strawmaster 7000 (27-September-2013) -16-...
  • Page 21 4. Line up hole on lug with hole on link bar, install bolt and secure with nut. 5. Back row: Install pin through the jack and lug. Secure with hair clip. (Not Shown) 6. See the adjustments section and adjust as required. 142628 - Strawmaster 7000 (27-September-2013) -17-...
  • Page 22 142383 - Caution, 6 Points (1) Repeat adjustment procedure if required. 142368 - Important, Install Pin (2) 142008 - Degelman - 6” x 25-3/4” (2) 143162 - Manual Holder Decal (1) 142279 - Reflector, Amber - 3-1/4” (2) Auto-fold Arm 142439 - Important, Back-up Evenly (2) 142280 - Reflector, Red 6-1/4”...
  • Page 23 Auto-Fold unlatches The latch is too loose on Latch holder has moved forward on the trailer frame. prematurely. the swing arm pipe. Move it back. 142628 - Strawmaster 7000 (27-September-2013) -19-...
  • Page 24 Arm Pipe Cross Joint Trailer Wheel Auto-Fold Latch Left Wing Beam Left Truss 10' 10' 10' 10' 10' 10' 10' 10' 10' 70’ Strawmaster Shown Manual Adjusment Option 10' 10' 10' 10' 10' 10' 10' 142628 - Strawmaster 7000 (27-September-2013) -20-...
  • Page 25 10’ Harrow Section NOTE: Stawmaster trailer height & tine angle adjustment is available with manual adjustment (standard) or hydraulic adjustment (optional) Hydraulic Auto-Fold is standard on all models. Transport Wheel IMPORTANT: End Wheel READ MANUAL 142628 - Strawmaster 7000 (27-September-2013) -21-...
  • Page 26 Slider 50’ (1) 243834 - Truss Arm Assembly 30’ (2) Transport Field 243837 - Truss 30’ 243189- Pin, Transport Bent (1) Slider 30’ (1) 243835 - Truss Beam 30’ (1) 118882 - Hair Pin, 2- 3/4” (1) 142628 - Strawmaster 7000 (27-September-2013) -22-...
  • Page 27 243225 - Hitch (1) 243074 - Hitch, 118615 - Flat washer, 1” x 1/4” thk (1) Cat 5 -optional (1) 116256 - Safety Chain, 20,200 lbs (1) 118520 - Flat washer, 1” (1) 118510 - Lock washer, 1” (1) 118464 - Nut, 1” GR8 (1) 142628 - Strawmaster 7000 (27-September-2013) -23-...
  • Page 28 122663 - Piston (1) 121763 - Barrel (1) 118441 - Lock nut, 7/8” UNF 122658 - Lock Ring (1) Unitorque (1) 122773 - Open Cap (1) 122769 - Rod & Clevis (1) 122791 - Seal Kit (1) 118796 - Shoulder Bolt, 1/2” GR8 UNC (2) 118924 - Flat Washer .59” ID x .9” OD (2) 122755 - Pin, 1-1/4” x 2-13/16” (2) 142628 - Strawmaster 7000 (27-September-2013) -24-...
  • Page 29 243388 - Auto-fold Latch Arm - RH (1) Red 6-1/4” (this side) (1) 142439 - Decal, Important-Back-up 142279 - Reflector, Evenly (1) Amber - 3-1/4” 118448 - Lock nut, 5/8” - unitorque (1) (shown) (1) 118514 - Flat washer, 5/8” (2) 143115 - Spring, Compression - 5” (1) 143034 - Spring, Compression - 4” (1) 243394 - Bushing,1-3/4” (1) 118512 - Flat washer, 1/2” (1) 118628 - Bolt, 1/2” x 5-1/2” (1) 142628 - Strawmaster 7000 (27-September-2013) -25-...
  • Page 30 118930 - Pin, 1” x 2-13/16” (2) 122563 - Piston (1) The piston on this above cylinder was previously non-unitised and required a 5 part seal. The old parts and numbers are shown: 122811 - Seal Kit (1) 142628 - Strawmaster 7000 (13-November-2014) -26-...
  • Page 31 118082 - Bolt, 1/2” x 3-1/2” (1) 118126 - Bolt, 1/2” x 4” (2) 118420 - Lock nut, 1/2” Unitorque (2) 243103 - Pin, Cross Joint -12” (2) 243791 - Cross Joint Assembly (1) 243000 - Cable, Auto-fold (1) 118830 - Hair pin 3-1/4” (1) 243001 - Cable pin (1) 142628 - Strawmaster 7000 (27-September-2013) -27-...
  • Page 32 243260 - Transport Wheel Holder, RH (opposite) (1) Previous 82’ 82’ (mounting hardware same as above - x2) Models 244388 - Swivel Shaft Holder - 82’ Only (2) 244392 - Transport Wheel Holder, 82’ LH (shown) (1) 244391 - Transport Wheel Holder, 82’ RH (opposite) (1) 142628 - Strawmaster 7000 (27-September-2013) -28-...
  • Page 33 131024 - Bearing, Cone - 1.375” ID (1) 131020 - Flat washer, 1” (1) 118423 - Slotted nut, 1” UNS (1) 131173 - Cap, Hub - H618 (1) - or - 131701 - Cap, Hub - CTD618 (1) 142628 - Strawmaster 7000 (27-September-2013) -29-...
  • Page 34 118924 - Flat Washer .59” ID x .9” OD (2) required a 5 part seal. The old 118796 - Shoulder Bolt, 1/2” GR8 UNC (2) parts and numbers are shown: 122721 - Seal Kit (1) 142628 - Strawmaster 7000 (13-November-2014) -30-...
  • Page 35 SMV Sign (Located on Left Side) 118123 Bolt, 1/4” x 1” (1) 118533 - Lock washer, 1/4” (2) 118402 - Nut, 1/4” (2) 243163 - SMV 142135 - SMV Sign Holder (1) Sign (1) (See Harrow Section Components p.34) 142628 - Strawmaster 7000 (08-September-2014) -31-...
  • Page 36 Previous Models used an Offest Frame Tine Section (S/N: 4803 - 6822) 244397 - Harrow 244061 - Harrow Section Straight Section Offset Frame - 6’ Frame - 6’ New Standard After Serial Number: SM6823 142628 - Strawmaster 7000 (27-September-2013) -32-...
  • Page 37 TINE MOUNTING HARDWARE 118420 - Lock nut, 1/2” (2) 118706 - Bolt, 1/2” x 2-3/4” HIHD (2) TINE OPTIONS QUANTITY OF TINES REQUIRED 30’ 50’ 62’ 70’ 82’ (10’ Section - 25 tines) (6’ Section - 15 tines) STANDARD OPTIONS 143113 - 5/8 Straight Tine (1) OTHER OPTIONS (call for availability) 143112 - 9/16 Straight Tine (1) 143110 - 9/16 Curved Tine (1) 143501 - 5/8 Straight Tine - wear tip (1) 142628 - Strawmaster 7000 (27-September-2013) -33-...
  • Page 38 243055 - Frame holder (1) 118508 - Lock washer, 5/8” (1) 118407 - Nut, 5/8” (1) 243061 Bar, Back-up (1) 243333 - Bar, Spring Steel (1) 118119 - Bolt, 3/4” x 4” (1) Note: When tightening, ensure pipe turns freely. 118468 - Nut, Top Lock Flange 1/2” (1) 110050 - Pipe Spacer, CSTG (1) 118126 - Bolt, 1/2” x 4” (1) 142628 - Strawmaster 7000 (27-September-2013) -34-...
  • Page 39 243965 - Clamp, Platform (5) 118703 - Lock Nut, 5/16” (5) 118145 - Bolt, 5/16” x 1-1/4” (5) 243966 - Non-Skid Grip (4) Clamp Installation Detail - Platform - Lock Nut - Bolt - Clamp 142628 - Strawmaster 7000 (13-November-2014) -35-...
  • Page 40 “Rephasing Cylinder” models (5) 118427 - Nut, 5/16” (5) Models with“Hydraulic 118530 - Lock washer, 5/16” (5) Lift” and “Rephasing Cylinders” 650256 - Hose clip, two-hose (5 or 2) use three-clip here Note: standard two-hose clip used on models with only standard “Auto-Fold” hydraulics. 142628 - Strawmaster 7000 (27-September-2013) -36-...
  • Page 41 23 Two-Hose 126662 - Hose, 3/8 x 390 (1) Clip Positions 126617 - Hose, 3/8 x 408 (1) 243853 - Three-clip 126663 - Hose, 3/8 x 420 (1) holder used here 126618 - Hose, 3/8 x 436 (1) (3), see Autofold Cylinder page for 126619 - Hose, 3/8 x 466 (1) mounting hardware. 126653 - Hose, 3/8 x 480 (1) 126654 - Hose, 3/8 x 510 (1) Trailer Wheel Cylinder (2) 126655 - Hose, 3/8 x 540 (1) End Wheel Cylinder (2) 142628 - Strawmaster 7000 (27-September-2013) -37-...
  • Page 42 Note: Part numbers for replacement hoses are listed below. Please refer to the diagram specific to your model to identify required hose(s). 126623 - Hose, 3/8 x 212 126080 - Hose, 3/8 x 258 126620 - Hose, 3/8 x 288 126604 - Hose, 3/8 x 300 126619 - Hose, 3/8 x 466 126085 - Hose, 3/8 x 528 126087 - Hose, 3/8 x 588 126089 - Hose, 3/8 x 648 50ft 126631 - Hose, 3/8 x 660 126664 - Hose, 3/8 x 720 62ft 142628 - Strawmaster 7000 (27-September-2013) -38-...
  • Page 43 660747 - Hose clip, four-hose Washer, 3/8” (4) Self-Tap Mount 118603 - Bolt, 3/8” x 1-3/4” (4) 30ft Hose Clips (Stud Mounted) 118427 - Nut, 5/16” 118530 - Lock washer, 5/16” Hose Clips (Self Tapping Screw Mounted) 118915 - Screw, 50ft Self-Tapping 5/16”x1- 3/4” 62ft 142628 - Strawmaster 7000 (27-September-2013) -39-...
  • Page 44 126604 - Hose, 3/8 x 300 123226 122130 2-3/4” x 8 x 1-1/8 “R” 126081 - Hose, 3/8 x 708 122830 122140 3” x 8 x 1-1/4 “R” 126082 - Hose, 3/8 x 768 122836 122150 3-1/4” x 8 x 1-1/4 “R” 126096 - Hose, 3/8 x 780 122850 122160 3-1/2” x 8 x 1-1/4 ”R” 126084 - Hose, 3/8 x 840 123258 122170 3-3/4” x 8 x 1-3/8 “R” 123275 122180 4” x 8 x 1-3/8 “R” 123278 122190 4-1/4” x 8 x 1-1/2 “R” 123300 122195 4-1/2” x 8 x 1-1/2 “R” Centered 36” 2-1/2” 70ft 82ft 142628 - Strawmaster 7000 (27-September-2013) -40-...
  • Page 45 Self-Tap Mount 118403 - Nut, Hose Clips (Self Tapping 3/8” (4) Stud Mounted Screw Mounted) 118503 - Lock 660747 - Hose clip, four-hose 118915 - Screw, Washer, 3/8” (4) Self-Tap Mount Self-Tapping 118603 - Bolt, 3/8” 5/16”x1- 3/4” x 1-3/4” (4) 70ft 82ft 142628 - Strawmaster 7000 (27-September-2013) -41-...
  • Page 46 244108 - Split Loom, 244107 - Split Loom, 244591 - Dual 3/8 x 39-1/2 (2) 3/8 x 10-1/2 (2) 3-Wire Lamp (RH) (1) Amber Tie to hold Tie to hold loom closed loom closed Grommet 3/8”x 1/4” 142628 - Strawmaster 7000 (24-June-2020) -42-...
  • Page 47 RH FROM J-BOX Note: Strip insulation 3/4” then fold wire over before inserting into crimp splice. LH LIGHT PLUG LH FROM J-BOX 129041 - Grommet, 3/8 x 1/4 (2) 244120 - Grommet, 5/8 x 5/8 (2) 142628 - Strawmaster 7000 (24-June-2020) -43-...
  • Page 48 Re-torque of fastening hardware, Hydraulic fluid purities, drive train alignments, and clutch operation) 3. If parts not made or supplied by Degelman have been used in the connection with the unit, if, in the sole judgement of Degelman such use affects its performance, safety, stability or reliability.
  • Page 49 It is the retail customer’s responsibility to deliver the product to the authorized Degelman dealer, from whom he purchased it, for service or replacement of defective parts, which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five days of failure.