Table of Contents
Advertisement
VISIBILITY ENHANCER (VE)
Depending on the imaging scene, the Visibility Enhancer function makes the darker part of a camera image
brighter, and automatically correct brightness and contrast to show bright parts clearly.
ZOOM Menu
The ZOOM menu is used to select the zoom mode.
DIGITAL ZOOM: OFF, ON, SRZ
•
OFF: When set to OFF, digital zoom does not
operate, and only optical zoom is available.
•
ON: Set to DIGITAL ZOOM ON, 12X digital
zoom is activated. The resolution would be
compromised when digital zoom is activated.
•
SRZ (Supper Resolution Zoom): Through
the use of "all pixel super resolution
technology" developed by Sony Corporation,
this product provides superior images while
maintaining the resolution without degrading
image quality, even when magnified. By combining with optical zoom 20× , zoom is achieved up to 30× in 4K
and 40× in FHD.ZOOM
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom times that you are operating displays on screen.
AF Sensitivity: NORMAL, LOW
- NORMAL: Reaches the highest focus speed quickly. Use this when shooting a subject that moves frequently. Usually,
this is the most appropriate mode.
- Low
Improves the stability of the focus. When the lighting level is low, the AF function does not take effect, even though the
brightness varies, contributing to a stable image.
MF SPEED: Manual Focus Speed, Value: 0-7
Manual Focus variable speed, that has eight speed levels.
Near Limit
Can be set in a range from OVER, 8cm, 10cm, 14cm, 18cm, 25cm, 35cm, 55cm, 80cm, 1m, 1.2m, 1.5m, 2m, 3m, 5m
AF MODE: Auto Focus Mode
The Auto Focus (AF) function automatically adjusts the focus position to maximize the high frequency content of the
picture in a center measurement area, taking into consideration the high luminance and strong contrast components. The
minimum focus distance is 80 mm at the optical wide end and 1000 mm at the optical tele end.
- Normal AF Mode
This is the normal mode for AF operations.
- Interval AF Mode
The mode used for AF movements carried out at particular intervals. The time intervals for AF movements and for the
timing of the stops can be set in one-second increments using the Set Time Command. The initial setting for both is set to
5 seconds.
- Zoom Trigger Mode
When zoom position is changed, it becomes AF mode during the pre-set value (initial setting is set to 5 seconds). Then it
stops.
OSD
>EXPOSURE
>WHITE BALANCE
>PICTURE1
>PICTURE2
GAMMA
>ZOOM
>SYSTEM
31
ZOOM
DIGITAL ZOOM
OFF
ZOOM RATIO OSD
ON
AF SEN.
NORMAL
MF SPEED
1
NEAR LIMIT
4.9M
AF MODE
NORMAL
Advertisement
Table of Contents
