Table of Contents
Advertisement
10. Or you can use CAT5/6 network cable (T-568B standard pinout) to make RS232 connection by following the
pin definition below:
Use RS-422(VISCA)/RS-485 (PELCO P/D)
You can use RS-422/485 port connect to optional controllers, such as joystick control keyboard, control PC station, to
operate the camera.
To perform pan/tilt and zoom operations using the joystick of the control keyboard, and to perform the Preset operation
using the control buttons.
An application software that supports this unit is needed if you use PC station.
System Configuration
17
Advertisement
Table of Contents
