Pelco P/D Keyboard Rs485 Connection - Bolin Technology 1 Series User Manual

14. How to make RS422 Daisy Chain multiple camera connection using HDBaseT with RS422 standard serial port controller:

PELCO P/D Keyboard RS485 Connection

NOTE: Use RS422 ports for RS485 connection. Only use TX+ and TX- for RS485 connection.
1. Set RS422 control method on Bottom Dip Switch.
2. Set Baud Rate on Bottom Dip Switch to the same as Baud Rate setting on the keyboard you are using.
3. Set the camera ID on OSD menu by remote controller
4.
Reboot the camera by turning it Off/On after the Bottom Dip Switch has been set up correctly.
5. Use PELCO P/D compatible keyboard.
6.
Use preset 95# on the keyboard to bring up/exit camera OSD menu.
Use joystick and Button "OPEN" or "CLOSE" to navigate OSD menu.
7.
8.
To operate keyboard, please refer to the user manual of the keyboard you are using.
PELCO RS485 Connection
20