Top Cabinet Block - Sony HT-NT5 Service Manual

HT-NT5
Note: Follow the disassembly procedure in the numerical order given.
2-2.

TOP CABINET BLOCK

1 ten caps (bottom)
2 ten screws
stand
Note 1: The center area of the tweeter on the top side protrudes out
more than the surface of the top cabinet block.
When working with the top side facing down, place stands
so that the center area of the top side tweeter is not crushed.
(Lay a soft piece of cloth between the unit and stands to
avoid damaging the top cabinet assy)
left side
front
tweeter
4 FFC 18P
(CN5003)
front side
The opposite side is
the terminal side.
connection cable
with speaker
saranet cushion
connection cable with speaker
insulator
slot
(top)
10
2 six screws
(BVTP3 10)
right side
(BVTP3 10)
top tweeter
rear side
rear side
slot
slot
soft cloth, etc.
bottom side
front side
top side
front side
3 Open the top cabinet block
in the direction of the arrow.
6 Draw the connection
cable with speaker
out of three slots.
2 three screws
(BVTP3 10)
2 six screws
(BVTP3
soft cloth, etc.
stand
front
tweeter
top tweeter
right side
5 saranet cushion
0 top cabinet block
7 connection cable with speaker
connector (CN6009) (tweeter)
8 connection cable with speaker
connector (CN6005) (woofer: R-ch)
9 connection cable with speaker
connector (CN6004) (woofer: L-ch)
REPEATER board
Note 2: Be careful not to damage
the REPEATER board.
bottom cabinet block
10)
left side