HT-NT5
Ver. 1.1
2-18. POWER CORD (AC1)
Note: When installing the power cord block, check the direction and position
of lock side of the cord bushing (FBS001) and install correctly.
lock side
cord bushing
(FBS001)
power cord
front side
left side
front side
2 Lift up the cord bushing (FBS001)
in the direction of the arrow.
2-19. POWER BOARD
1 power cord connector
(CN901)
3 two screws
left side
front side
bottom cabinet block
22
[white] : US, CND
[blue] : Except US, CND
1 power cord
connector
(CN901)
claw
side
claw
side
(BVTP3
8)
5 cord bushing
(FBS001)
4 Unlock.
to
POWER
board
hole
3 Draw out the power cord
3 two screws
(BVTP3
8)
power cord
(AC1)
120 +10, -0 mm
6 power cord
(AC1)
block from the hole.
bottom cabinet block
4 POWER board
2 connector (CN6001)
Note: Before connect this connector,
make sure to refer to
"CAPACITOR ELECTRICAL
DISCHARGE PROCESSING"
on page 4.
lock side
cord bushing
(FBS001)