Sony HT-NT5 Service Manual

SERVICE MANUAL
Ver. 1.2 2016.07
• All of the units included in
the HT-NT5 (SA-NT5/SA-
WNT5/Remote control) are
required to confi rming op-
eration of SA-NT5. Check in
advance that you have all of
the units.
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
COMPONENT MODEL NAME
Bar Speaker (Active Speaker System)
Subwoofer (Active Subwoofer)
• Please refer to service manual separately issued for Subwoofer.
Amplifier section
(US)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 8ohms loads, both channels
driven, from 200 - 7,000Hz; rated
25W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 75W
(per channel at 8ohms, 1kHz)
Front tweeter L/Front tweeter R
speaker blocks: 35 W (per channel at
4ohms, 10kHz)
Top tweeter L/Top tweeter R speaker
blocks: 25 W (per channel at 4ohms,
20kHz)
(CH)
POWER OUTPUT (rated)
Front L/R speakers: 36 W (per channel at 8
ohms, 1 kHz)
Front tweeter L/Front tweeter R speaker:
17 W (per channel at 4 ohms, 10 kHz)
Top tweeter L/Top tweeter R speaker:
17 W (per channel at 4 ohms, 20 kHz)
(BR)
The following values were measured at
127 V AC 60 Hz
RMS POWER OUTPUT:
Front L + Front R: 72 W (36 W per
channel × 2, at 8 ohms,
1 kHz, 10% THD*)
Front tweeter L/Front tweeter R
speaker blocks: 34 W (17 W per
channel × 2, at 4 ohms, 10 kHz,
10% THD*)
Top tweeter L/Top tweeter R speaker
blocks: 34 W (17 W per channel × 2,
at 4 ohms, 20 kHz, 10% THD*)
* Total harmonic distortion
(Except US, CH, BR)
POWER OUTPUT (rated)
Front L + Front R: 50W + 50W
(at 8ohms, 1kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 75W
(per channel at 8ohms, 1kHz)
Front tweeter L/Front tweeter R
speaker blocks: 35 W (per channel at
4ohms, 10kHz)
Top tweeter L/Top tweeter R speaker
blocks: 25 W (per channel at 4ohms,
20kHz)
Inputs
HDMI IN 1/2/3*
ANALOG IN
TV IN (OPTICAL)
Outputs
HDMI OUT (TV (ARC))*
*HDMI IN 1/2/3 and HDMI OUT (TV (ARC))
jacks support HDCP 2.2 protocol. HDCP
2.2 is newly enhanced copyright
protection technology that is used to
protect content such as 4K movies.
9-896-276-03
Sony Video & Sound Products Inc.
2016G33-1
©
2016.07 Published by Sony Techno Create Corporation
Photo: SA-NT5
HT-NT5
SA-NT5
SA-WNT5
SPECIFICATIONS
2)
HDMI Section
BLUETOOTH standard profiles indicate
Connector the purpose of BLUETOOTH
Type A (19pin) communication between devices.
3)
Codec: Audio signal compression and
USB section
conversion format
(USB) port: 4)
Abbreviation for Subband Codec
Type A (For connecting USB memory, 5)
Abbreviation for Advanced Audio
memory card reader, digital still
Coding
camera)
Front L/Front R speaker block section
LAN section
Speaker system
LAN(100) terminal
2-way 3 speaker system, Acoustic
100BASE-TX Terminal
suspension
Speaker
Wireless LAN section
Woofer: 60mm (2 3/8 in.) cone type
Communication system
Tweeter: 14mm (9/16 in.) soft dome
IEEE 802.11 a/b/g/n
type × 2
Frequency band (Except CH)
2.4 GHz, 5 GHz
General
Frequency band (CH)
Power requirements
2.4 GHz - 2.4835 GHz
120 V AC, 60 Hz (US, CND)
5.15 GHz - 5.35 GHz
120 V AC, 50 Hz/60 Hz (TW)
5.725 GHz - 5.85 GHz
120 V - 240 V AC, 50 Hz/60 Hz (EA, BR, LA)
BLUETOOTH section 220 V - 240 V AC, 50 Hz/60 Hz (AEP, RU,
Communication system UK, AUS, CH, SP, AR)
BLUETOOTH Specification version 4.1 Power consumption
Output On: 50W
BLUETOOTH Specification Power Standby mode: 0.5W or less
Class1 [Quick Start/Network Standby] is set to
Maximum communication range [Off] (default setting): 3 W
1)
Line of sight approx. 30m [Quick Start/Network Standby] is set to
Maximum number of devices to be [On] (all wired network ports
registered connected, all wireless network ports
9 devices activated): 7W
Frequency band 2) Dimensions* (approx.) (w/h/d)
2.4 GHz band (2.4GHz - 2.4835GHz) 1,080mm × 58mm × 127mm (42 5/8 in
Modulation method × 2 3/8 in × 5 in) (without grille frame,
FHSS (Freq Hopping Spread Spectrum) without wall mounting brackets)
Compatible BLUETOOTH profiles 1,080mm × 64mm × 127mm (42 5/8
A2DP 1.2 (Advanced Audio Distribution in × 2 5/8 in × 5 in) (with grille frame,
Profile) without wall mounting brackets)
AVRCP 1.5 (Audio Video Remote 1,080mm × 135mm × 80mm (42 5/8
Control Profile) in × 5 3/8 in × 3 1/4 in) (without grille
3) frame, with wall mounting brackets)
Supported Codecs
SBC 4) , AAC 5) , LDAC 1,080mm × 135mm × 80mm (42 5/8
in × 5 3/8 in × 3 1/4 in) (with grille
Transmission range (A2DP)
frame, with wall mounting brackets)
20 Hz - 40,000 Hz (LDAC sampling
1)
frequency 96kHz with 990 kbps
*Not including projection portion
transmission)
Mass (approx.)
20 Hz - 20,000 Hz (Sampling frequency
3.2kg (7 lb 7/8 oz) (without grille
44.1kHz)
frame)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
HT-NT5
Canadian Model
AEP Model
Australian Model
Chinese Model
Compatible iPod/iPhone models
The compatible iPod/iPhone models are as
follows. Update your iPod/iPhone with the
latest software before using with the
system.
BLUETOOTH technology works with:
iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/
iPhone6/iPhone 5s/iPhone 5c/iPhone 5/
iPhone 4s/iPhone 4
iPod touch (6th generation)/iPod touch
(5th generation)
Wireless transmitter section
Communication system
Wireless Sound Specification version
2.0
Frequency band
2.4GHz (2.4000GHz - 2.4835GHz)
Modulation method Modulation method
Pi/4 DQPSK
Supplied Accessories
•Bar Speaker (1)
•Grille frame (1)
•Wall mounting brackets (2), Screws (2),
Grille frame support hook (2)
•AC plug adapters (2) (LA)
•Subwoofer (1)
•Remote control (1)
•R03 (size AAA) batteries (2)
•HDMI cable (4K 60p 18Gbps
compatible) (1) (Except AEP, UK)
•Optical digital cable (1) (AEP, UK)
•Startup Guide (1)
•Operating Instructions (1)
Design and specifications are subject to
change without notice.
SOUND BAR
ACTIVE SPEAKER SYSTEM
SA-NT5
US Model
UK Model
E Model
HT-NT5
SA-NT5