Maintenance - Bauer 20181F-B Owner's Manual & Safety Instructions

Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL DiScHarGE,
BEFOrE any MaintEnancE Or rEpairS arE DOnE (including clearing jams):
• Wear anSi-approved safety goggles with side shields.
Other people in the work area must also wear ANSI-approved impact safety goggles with side shields.
• release the trigger.
• attempt to discharge the tool into a piece of scrap wood to ensure that
it is disconnected and is incapable of driving any fasteners.
• Empty the Magazine and leave it open during service.
tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFOrE EacH uSE, inspect the general
condition of the tool. Check for:
• proper Contact Safety operation
• free Contact Safety and Trigger movement
• loose hardware or housing
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may
affect its safe operation.
Battery removal
nOtE: Contains Li-Ion battery. Battery must be
recycled or disposed of properly. Do not open,
crush, heat above 140° F or incinerate.
1. Remove six screws from side of Staple
Gun, then remove housing.
Screws
Item 57241 For technical questions, please call 1-888-866-5797.
2. aFtEr uSE, wipe external surfaces
of the tool with clean cloth.
3. Store tool in dry, indoor area out of reach
of children and away from metal objects
(i.e., paperclips, coins) to prevent shorting.
2. Disconnect Battery wires.
3. Remove Battery.
Page 9