Table of Contents
Advertisement
MRFD2N
Setting up / fastening MRF
Place the MultiRheo Filter on a flat horizontal surface that has a sufficient load-
carrying capacity and resilience.
Make sure to leave sufficient room, at least 1 m, over the filter housing to change
the filter element.
Fasten the filter with suitable floor anchors.
Hydraulic connection of the MRF
Connect the MRF hydraulically using a flexible hose connection or pipeline.
Make sure that no vibrations and/or stress from other machinery and equipment are
carried over to filter housing.
Use expansion joints if necessary.
HYDAC FILTER SYSTEMS GMBH
MoWa MRFD2 3312153b en-us 2012-08-08.doc
en(us)
Setting up / fastening MRF
Page 23 / 32
2012-08-08
Advertisement
Table of Contents
Need help?
Do you have a question about the MRFD2N and is the answer not in the manual?