Safety Information And Instructions; Obligations And Liability - HYDAC FILTER SYSTEMS MRF 3 Operating And Maintenance Instructions Manual

MRF 3

Safety information and instructions

These operating instructions contain the key instructions for properly and safely
operating the MRF.

Obligations and Liability

The basic prerequisite for the safe and proper handling and operation of the MRF is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered by all those who work with the MRF.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the MRF.
The MRF has been designed and constructed in accordance with the current state
of the art and recognized safety regulations. Nevertheless, hazards may be posed to
the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
The MRF is only to be used as follows:

solely for its designated use

only when in a safe, perfect condition
Immediately remedy any malfunctions that might impair safety.
Our General Terms and Conditions apply. They are made available to the owner
upon concluding purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:

improper use of the MRF or use deviating from its designated use

improper assembly, installation, commissioning, operation and maintenance of
the MRF

operating the MRF when the system equipment or systems are defective

modifications to the MRF made by the user or purchaser

improper monitoring of product components subject to wear and tear

improperly performed repair work
HYDAC FILTER SYSTEMS GMBH
BeWa MRF3 3218003c en-us 2012-02-22.doc
Safety information and instructions
en Page 8 / 32
2012-02-22