Step by step assembly instructions
Step One
Hook the pre-attached metal fixings on the Side Rails (3) over the pre-inserted bolts in the Headboard (1)
and Footboard (2) and hand-tighten to loosely secure parts together. Do not tighten with M5 Allen Key (B)
until you have inserted the Centre Rail in the next step.
3
BRACKET
SIDE RAIL
Step Two
Insert Centre Rail (6) into the brackets in the centre of the Headboard (1) and Footboard (2).
Push down fully and secure in place using M6 x 25mm bolt (G) and tighten with M4 Allen Key (A). You can
now tighten the bolts at the Side Rails from previous step (Step One) with M5 Allen Key (B) so all fastenings
are now tightened.
3
Bracket
Side Rail
G.
A.
M6 x 25mm x 2
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
CENTRE RAIL TO FIT IN
1
NEXT STEP
AND
2
3
1
Centre Rail
(6)
M5
B.
M4 Allen Key
M5 Allen Key
x 1
x 1
2
6
3/6
1
3
AND
2
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE RAILS
(FROM STEP ONE)
M6 x 25mm (G)
M4 (A)
1
3
Bracket
Side Rail