Step By Step Assembly Instructions - John Lewis Mixit Assembly Manual

Step by step assembly instructions

Step One
1. ttach 4x wooden dowels (C) into the pre-drilled holes on top/bottom panels (1) as shown.
2. Place the cam lock (B) into the holes on top/bottom panels (1) as shown, arrow pointing towards the
bolt.
Step Two
1. ttach 8x wooden dowels (C) into the pre-drilled holes on rails (5) (6) as shown.
C
Step Three
1. ttach 4x wedgefix housing (D) into the pre-drilled holes on shelf (3) as shown.
B
B
C
5
C
1 x 2
6
Raw
3
D
C
D
Page 4
MXT 01/13