Advertisement
Quick Links
Asuka double bed
Stock numbers 803/13901/02 double/king bed
Thank you for purchasing this Asuka bed. Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
This item is HEAVY
Necessary Tools
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 20 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Advertisement
Related Manuals for John Lewis Asuka double bed 803/13901/02
Summary of Contents for John Lewis Asuka double bed 803/13901/02
- Page 1 Asuka double bed Stock numbers 803/13901/02 double/king bed Thank you for purchasing this Asuka bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. This item is HEAVY Necessary Tools Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Please check the pack contents before attempting to assemble this product.
- Page 2 Fittings and parts checklist Headboard x 1 Half moons x 8 Footboard x 1 Nuts x 8 Side rails x 2 Threads x 8 Centre rail x 1 Spanner x 1 Slats double bed x 32 Bolt x 2 Slats king size x 34 Ends for slats double x 64 Bolt x 2 Ends for slats king size x 68...
- Page 3 Step by step assembly instructions Step One 1. Push the 8 threads, E into the headboard and the footboard as shown below. Tighten the threads by hand ensuring that there is approximately half of the threads still showing. Using the 12 x 20mm screws, I attach the two brackets, J into the headboard and the footboard using the pre-drilled holes, tighten with a phillips screwdriver.
- Page 4 3. Making sure the holes in the centre rail are facing upwards, put the centre rail into the two brackets. Secure it in place using the 2 x 40mm bolts G, and the 2 wing nuts H. 4. Push a plastic cap, 6 onto each end of a slat and with the peg facing downwards push the slat into the pre drilled holes as shown below.
-
Page 5: Care And Maintenance
Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture as careless handling may cause damage or injury. No liability will be accepted for damage or injury caused by incorrectly installed furniture. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...