John Lewis Silentnight Oscar Bunk Bed 803/63201 Aassembly Instructions

Download this manual

John Lewis

Thank you for purchasing this Oscar

ensure safe and satisfactory operation of this product.

Pre-assembly Preparation

Please ensure instructions are read in full before attempting to assemble this product.

Necessary Tools

Please check the pack contents before attempting to assemble this product. A full checklist of

components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.

HEAVY

This product is

WHEN LIFTING

This product takes approximately

The fittings pack contains

CHILDREN

Read this leaflet in full before commencing assembly.

If you require any additional information or have any issues with this product please call the John Lewis

Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com

Oscar 90cm Bunk Bed

Bunk Bed

. It should be assembled as near as possible to the point of use.

to avoid personal injury and (or) damage to the product.

1 HOUR

SMALL PARTS

. Please read the instructions carefully before use to

For product support or spare parts

please call the John Lewis Helpline;

Tel: 01244 - 689949

e-mail:mail@fwgroup-uk.com

2 PEOPLE

to assemble with

KEPT AWAY FROM YOUNG

which should be

1/5

Stock number: 803/63201

TAKE CARE

Page 1 The fittings pack contains which should be CHILDREN Read this leaflet in full before commencing assembly. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com...
Page 2 Fittings and parts checklist Bedstead Parts *Please Note: Footboard does not have hole in top - left corner Headboard x 1 Footboard x 1 Please Note Position of Holes When Identifying Parts Upper Base x 1 Under Base x 1 Front Guardrail x 1 Back Guardrail x 1 Ladder x 1...
Page 3 Step by step assembly instructions Step One Attach the Under Base (4) to the Headboard (1) and Footboard (2) using Rect. Connector (E) and JCBC Screw M8 x 75 mm (A) and hand-tighten to loosely secure parts together. Do not tighten with Allen Key (H) until you have put all parts together.
Page 4 Step Three Attach the Ladder (7) to the Upper Base (3) and the Under Base (4) using JCBC Screw M6 x 65 mm (B). Now, tighten all parts together using the appropriate Allen Key - (G) and (H). Step Four This bed is now ready to use.
Page 5: Care And Maintenance
If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com This bed is for use with a standard single size mattress L190 x W90 x H18.