Summary of Contents for John Lewis Charlotte Bed 80371707
Page 1
Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
Page 2
Fittings and parts checklist Fittings M4 Allen Key x 1 M6 X 25mm Bolt x 10 M5 Allen Key x 1 M8 Spring Washer x 4 M8 Nut x 4 Centre Caps x 7 Side Caps x 14 Screw 3.5 X 30mm x 4 M13 Spanner x 1 Wide Centre Caps x 8 Wide Side Caps x 16...
Page 3
Step by step assembly instructions Step One Hook the pre-attached metal fixings on the Side Rails (3) over the pre-inserted bolts in the Headboard (1) and Footboard (2) and hand-tighten to loosely secure parts together. Do not tighten with M5 Allen Key (B) until you have inserted the Centre Rail in the next step.
Page 4
Step Three Attach Metal Plate (8) and Leg (7) together as shown in Step 1. Attach together Leg (7) and Metal Plate (8) using M8 Spring Washer (H) and M8 Nut (I) then tighten with M13 Spanner (K). STEP 1 STEP 1 STEP 2 STEP 2...
Page 5
Step Five With the curved side facing upwards, insert 2 slats into a centre cap then into 2 side caps on either end(x15). (Please note the Wide Slats (5) must be inserted with the Wide Centre Caps (E) and Wide Side Caps (F)).
Page 6
This product complies with BS EN 1725:1998. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.