Advertisement
Step by step assembly instructions
Step One
Place Metal Bracket on Side Rails (3) over pre-inserted bolts in Headboard (1) and Footboard (2) and hand-tighten
to loosely secure parts together. Do not tighten bolts with M5 Allen Key (B) until you have inserted the Centre Rail
in the next step.
Fig.1
3
Bracket
Side Rail
M5
B.
M5
Step Two
Lower the Centre Rail (5) into the brackets in the centre of the Headboard (1) and Footboard (2) as shown in
fig.3. Now secure the Centre Rail (5) using M6 x 25mm Bolts (E) and tighten with M4 Allen Key (A) as shown
in fig.4. You can now tighten the bolts at the Side Rails from previous step (Step One) with the M5 Allen
Key (B) so all fastenings are now tightened.
5
Centre Rail
E.
A.
M6 x 25mm (2)
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
1
CENTRE RAIL TO FIT IN
AND
NEXT STEP
2
2
M6 x 25(E)
1
And
2
M4(A)
M4
3
1
And
2
5
3
2
3/6
1
3
AND
2
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE RAILS
(FROM STEP ONE)
1
5
3
Fig.2
1
3
Bracket
Side Rail
Advertisement
