ADTRAN Total Access 900 Series Hardware Installation Manual page 5

TA 900 Series (3rd Gen) HIG
FCC-Required Information
FCC regulations require that the following information be provided in this manual:
1. This equipment complies with Part 68 of Federal Communications Commission (FCC)
rules and requirements adopted by America's Carriers Telecommunications Association
(ACTA). Each registered interface has a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. If requested, provide this
information to the telephone company.
2. If this equipment causes harm to the telephone network, the telephone company may
temporarily discontinue service. If possible, advance notification is given; otherwise,
notification is given as soon as possible. The telephone company will advise the customer
of the right to file a complaint with the FCC.
3. The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper operation of this equipment. Advance notification
and the opportunity to maintain uninterrupted service are given.
4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and
warranty information. The telephone company may require this equipment to be
disconnected from the network until the problem is corrected, or it is certain the
equipment is not malfunctioning.
5. This unit contains no user-serviceable parts.
6. This equipment is designed to connect to the telephone network or premises wiring using
an FCC-compatible modular jack, which is compliant with Part 68 and requirements
adopted by ACTA.
7. The following information may be required when applying to the local telephone company
for leased line facilities:
Product
Total Access 908
US: HDCDENAN1213908F1
T1 Products
Total Access 916/
924 US: HDCDE02A1213924F1
T1 Products
Total Access 924
with optional FXO US: HDCDE02A1213924F1
ports
8. The ringer equivalency number (REN) is useful in determining the quantity of devices you
may connect to your telephone line and still have all of those devices ring when your
number is called. In most areas, the sum of the RENs of all devices should not exceed
five. To be certain of the number of devices you may connect to your line as determined
by the REN, call your telephone company to determine the maximum REN for your calling
area.
9. This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact your state public utility
commission or corporation commission for information.
61213908F1-34A
Registration
Number
1.544 Mbps - SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
Analog Loop Start/Ground Start
Copyright © 2020 ADTRAN, Inc.
Service Type REN/SOC
0.2A/9.0F
FCC-Required Information
FIC
04DU9-BN
04DU9-DN
N/A/6.0N
04DU9-1KN
04DU9-1SN
02LS2/02GS2
USOC
RJ-48C
RJ21X
5