Rack Mounting Total Access 900 Series; Figure 3. Wall Mounting The Unit; Table 2. Available Rackmount Brackets - ADTRAN Total Access 900 Series Hardware Installation Manual

Unit Installation

Rack Mounting Total Access 900 Series

For a rackmount installation, optional rackmount brackets must be purchased from ADTRAN.
These rack mounting brackets connect to EIA/WECO style telecom racks using standard rack
mounting hardware.
Table 2
from ADTRAN:
Part Number
1200927L18
1200927L19
1200927L23
20
Step 1: Prepare the
mounting surface by
attaching a board
(typically plywood, 3/4"
to 1" thick) to a wall
stud using #6 and #10
woods screws (2.5" or
greater in length).

Figure 3. Wall Mounting the Unit

lists the Total Access 900 Series rack mounting brackets available

Table 2. Available Rackmount Brackets

Product
Total Access 908
Total Access 916/624
Total Access 916/924
Copyright © 2020 ADTRAN, Inc.
TA 900 Series (3rd Gen) HIG
Step 2: Wallmount the Total
Access 900 Series unit using
two #6 to #10 wood screws
through the unit's brackets
and into the mounted board
(screw length should not
exceed board thickness).
Bracket Size
19" rackmount brackets
19" rackmount brackets
23" rackmount brackets
61213908F1-34A