Lennox e-Baltic D BOX 55 Installation, Operating And Maintenance page 26

HANDLING
FORKLIFT PROTECTIONS
WARNING: NEVER LIFT THE UNIT WITHOUT FORKLIFT PROTECTIONS
Do not lift the unit by the side (coil end side or drain pan outlet side). This will damage the unit.
Lift the unit on the long side using a forklift with dimensions according to the figure below.
Do not remove the unit plastic cover while lifting.
REMOVING THE FORKLIFT PROTECTION LOCATED UNDER THE MACHINE (Units C, D, E, E+)
Before installation, remove the forklift protection which is located under machine desk.
IMPORTANT note about forklift protection removal
Take care not to hurt anybody when removing the forklift rails.
Locate the machine on a safe area while removing the forklift rails from the machine
WARNING: NEVER LIFT THE UNIT WITHOUT FORKLIFT PROTECTIONS
REMOVE THE FORKLIFT PROTECTIONS BEFORE INSTALLATION
e-BALTIC-IOM-2020.12-EN
Do not remove the unit
plastic cover while lifting.
DO NOT LIFT THIS SIDE
NO
23