Lennox e-Baltic D BOX 55 Installation, Operating And Maintenance page 34

INSTALLATION
HORIZONTAL CUSTOMER WIRING ON F BOX AND G BOX (OPTION)
To horizontally wire a F or G-BOX e-BALTIC power supply, it must be placed on feet.
Do not install the unit on mounts (fixed or antivibration) other than those provided by LENNOX.
e-BALTIC-IOM-2020.12-EN
First, remove the 4 transport feet and
the 2 sheaths when the e-BALTIC unit
is lifted.
Place the 4 side feet and 4 corner feet
(supplied loose) in place of the
transport feet and sleeves and tighten
moderately with screws and washers.
Put the unit on the ground.
31