System Main Screen; System Information Screen - Graco PR-X Setup - Operation - Repair

HMI Display Operation and Identification

System Main Screen

F . 16 System Main Screen
IG
On the Automatic Screen 1, press
the System Main Screen. On this screen, the operator
can switch the system to Automatic mode, Manual
mode, Setup mode, System Relief function or Advanced
Mode.
Press 'F1' or select the
options (Chinese or English). Press 'F2' or select the
button to display the System Information Screen.
If the operator has already set up password protection
on Advanced Setup Screen 1, see page 37, the
password must be entered to visit the Setup Screens.
To open the Advanced mode, the operator must enter
the password 1492.
The Advanced option won't show
until the password has been entered.
Select 'System Relief' button, the system will identify
whether the inlet valve (AL or AM) is closed. If the Inlet
Valve (AL or AM) is opened, it will be closed. Then the
MD2 Dispense Valve (AE) will be opened. The whole
system pressure is relieved. When the 'System Relief' is
selected, the real-time pressure of part A and part B will
be displayed on the System Main Screen.
28
button to display
button to display language

System Information Screen

F . 17 System Information Screen
IG
General system information can be found in this screen.
Press 'F1" or select the
System Main Screen.
button to return to the
3A7526B