Vimar 02952 Installer Manual page 5

Thermostat
General characteristics and functions
Touch screen electronic thermostat for room temperature
control (heating and air conditioning) of 2 independent
zones, KNX standard home automation system, 1 NO relay
output 4 A 24 V~, 1 input for electronic temperature sensor
or wired temperature sensor, 1 programmable digital input,
RGB LED backlighting, to be completed with Eikon Evo,
Eikon, Arké or Plana cover plates, grey - 2 modules.
02952
General characteristics
The thermostat is suitable for controlling room temperature
(heating/air-conditioning) in 2 or 4 pipe systems (heating/air-
conditioning) and neutral zone (only in 4-pipe systems), with
the "boost" function to activate a second source that makes
it possible to reach the desired thermal comfort faster; it can
interact with other thermostats and with a monitoring unit (PC
with Well-contact Suite software). It can manage 2 climate
zones completely independently (equivalent to two thermostats
A and B). For each zone the heating/air-conditioning modes are
managed according to the related reference temperature. It is
equipped with a relay programmable as NC or NO that can be
used for general use (e.g. lighting, zone solenoid valve closing,
activating electric towel warmer, etc.) or to control speed 1 of
the fan coil, which is managed by thermostat A or thermostat
B. It also has a digital input programmable as NC or NO,
which can be used for other applications such as detecting an
open window. The thermostat features an RGB display with 5
capacitive buttons for controlling the temperature setpoint and
the speed of the fan coil, the configuration of the operating
modes and the selection of thermostat A or B to view/control; it
has an RGB backlit display whose colours can be adjusted via
parameters with ETS.
Display icons
Comfort (Guest in room)
Standby (Guest not in room)
Economy (Room free)
Off
Protected mode
Buttons locked
Heating valve on
HVAC valve on
FRONT VIEW.
Fan coil speed button
Operation
setup button
Thermostat
selection
button
Fan coil Ambient
speed humidity
Heating with boost function
Air-conditioning with boost function
Temperature display and thermostat B menu
Temperature alarm due to exceeding threshold
Window open indicator
Temperature measurement unit (°C or °F)
Relative humidity (displayed to the left of the tem-
perature)
Dewpoint alarm (linked to item no. 21, appears to the
left of the temperature)
Fan coil with 3 speeds and proportional control
v1
The 3 speeds of the fan coil are indicated by the
symbols v1, v2 and v3
v2
The proportional speed control is indicated by the
circular icon divided into 10 parts, each one of which
corresponds to 10% of the maximum speed
v3
Note.
In 4- pipe systems, the display may show errors (E1, E2,
E3, E4) as illustrated on the next page.
Behaviour after bus power on/off
Bus power off: -.
Bus power on: the status will be set based on the setting of the
parameters and the corresponding telegrams sent over the Bus.
Behaviour after reset
As for Bus power-on.
N.B.
The thermostat saves the comfort and standby setpoints
set manually by the user; if you wish to reset them, set the ETS
parameter "Reset Setpoint Shift in Economy Mode=YES".
When switched to "Economy" mode, the thermostat will reset
the STBY and CNF values.
Setpoint increase button
Comfort operation
mode on
Current temperature
Heating valve on
Setpoint decrease
button
5