Table 2-1: Required Ethernet Cables - Alvarion BreezeACCESS 900 System Manual

Chapter 2 - Installation
1" threaded mounting pole for the GU-RA GPS antenna
Antenna Mounting kit
Additional General Item Required for the Installation
The following items are also required to install the Stand-Alone AU or
modular Base Station equipment:
900 MHz antenna(s) (see list of approved antennas in Table 2-3 on
page 2-7)
Grounding cables and other lightning protection materials according
to specific installation requirements
Ethernet cable(s)
Unit Type
AU (AU-NI, BS-AU)
GPS BS-GU module
For configuring basic parameters – a portable PC with Terminal
Emulation software (connected to the equipment using the
appropriate Monitor cable)
OR
A portable PC with Ethernet NIC, an Ethernet cable (see Table 2-1)
and Telnet software (or BreezeCONFIG ACCESS Configuration
Utility)
NOTE
The BS-GU does not have an external Monitor port and it should be configured via
the Ethernet port using Telnet.
Installation tools and materials, including appropriate means (e.g.
poles) for installing the system components and antennas.
2-4

Table 2-1: Required Ethernet Cables

Connection to a PC
Crossed
Straight
Connection to a hub/router
Straight
Crossed
BreezeACCESSS 900 System Manual