3 - SAFETY PROCEDURES - GENERAL INFORMATION
EN
3.1
GENERAL SAFETY PRESCRIPTIONS
It is of the utmost importance to read this manual carefully before
installing, using or servicing the bar feeder or performing any other work .
Constant compliance with the instructions in this manual is a guarantee of
protection against injury.
•
The operator and skilled engineer must perform only their specified duties.
•
Do not tamper with the safety devices for any reason whatsoever.
•
Comply strictly with the work health and safety regulations issued by the relevant authorities
in the country of installation of the machine.
•
IEMCA declines any liability whatsoever for injury to persons or damage to property if the
relevant safety prescriptions are disregarded.
3 - Pag. 2 / 4
SIR 52 MS52 P/F