General Safety Regulations - IEMCA VIP80E-II Manual For Use And Maintenance

3 - SAFETY PROCEDURES - GENERAL INFORMATION
EN
3.1

GENERAL SAFETY REGULATIONS

It is of the utmost importance to read this manual carefully before
installing, using, servicing the bar feeder or performing any other work on
it. The constant compliance with the instructions in this manual ensures the
operator safety.
• The user and expert operator must perform the specified duties only.
• Do not tamper with the safety devices for any reason whatsoever.
• Comply strictly with the health and safety regulations at work issued by the relevant
authorities in each country.
• IEMCA declines any liability whatsoever for injury to persons or damage to property if the
relevant safety regulations are disregarded.
• The bar feeder must only be used for the procedures indicated by IEMCA: No other improper
use is allowed.
• During operation, the bar feeder will release small amounts of oil mist. Install the bar feeder
in a suitably ventilated area.
The bar feeder has not been designed for use in an explosive atmosphere.
• Do not use the bar feeder in places subject to extreme temperatures: The bar feeder must
work in closed environments at temperatures which are also accessible to the operator.
3 - Pag. 2 / 6
VIP80E-II