Table of Contents
Advertisement
Figure 12 Front view of the HP StoreOnce 2620 Backup system
1. Power On button/LED
2. Hot plug drives
3. Appliance Beacon LED
4. system Health LED
5. and 6. LAN port LEDS
1GbE LAN port LEDs
The 1GbE LAN ports have two LEDs, as illustrated on the rear of an HP StoreOnce 4220 Backup
system below.
Figure 13 1GbE LAN port LEDs (example shows HP StoreOnce 4220 Backup system)
1. LAN network speed LED indicator
46
Understanding LEDs
Steady green: Power connected, device ready to use
Steady amber: Device switched off or in hibernation with
power connected
Off: No power connected
Steady blue: identifies the unit. The LED can be beaconed
on and off from the StoreOnce Management Console.
Steady green: Hardware is performing correctly
Flashing amber: degraded condition
Flashing red: critical condition, such as power supply or
fan failure
Flashing green: network connection
Off: no network connection or network not configured
Steady green: The LAN connection is using 10 Mbps/100
Mbps link.
Steady amber: The LAN connection is using a GbE link.
Off: No connection.
Hide quick links:
Advertisement
Table of Contents
