Table of Contents
Advertisement
SENSORS
Additional Add-On Sensors
Add additional thermo-hygro,
water leak, or rain sensors for
extra monitoring.
For purchase information,
check your local retailers or visit
www.lacrossetechnology.com/view
to learn more
Whether you choose to connect with the La Crosse
View app or not, this station can display data for up
to 4 extra sensors. This data will appear in the blue
Extra Sensor field and in your La Crosse View app
if connected.
Adding Sensors to Your Station
1.
Hold the
EXTRA
Sensor Reception Indicator
2.
Install batteries into your sensor. If the sensor
has a
TX
button, press it to force a transmission
signal. This button is usually located in or near
the sensor's battery compartment. The LED
light on the sensor will flash once.
3.
Your sensor should connect within the next 3
minutes, briefly displaying its ID and type on
the LCD. The Sensor Reception Indicator will
show solid on the screen when a sensor is
connected.
4.
Press the
EXTRA
data you'd like displayed on the LCD. The
Auto Scroll Icon ( ) will appear if activated.
Note:
When first powering up, or after a factory
reset, extra sensors should automatically connect
to your station.
button until you see the
start to animate.
button to cycle through the
20
Hide quick links:
Advertisement
Table of Contents
