Table of Contents
Advertisement
PRESSURE
Relative Pressure
•
Your Relative Pressure reading will come
from your station's internal barometer.
•
Please allow up to 10 days for automatic
calibration, or program your local pressure
value in the Settings Menu.
•
The arrows located to the left of the values
represents Pressure Tendency ( / ).
•
Select your desired unit of measurement
(hPa or InHg) in the Settings Menu.
You can also set a specific pressure
number setting if desired.
Note:
The default pressure reading is 1013 hPa (29.92 INHg).
The station will acclimate on it's own if the pressure number
is not set.
SENSORS
Spot Water Leak Sensor
Your Water Leak Sensor data shares the
same display area as the pressure readings.
How to View Additional Data in the
Extra Sensor Field
Press the
EXTRA
button on the top of the
station to view Water Leak, Pressure, other
add-on sensors data (see page 18), or select
Auto Scroll to toggle through all of available
readings.
When the Auto-Scroll feature is active, the
Auto Scroll icon (
Sensor field. Each reading will show for 6
seconds and the sensor icon will blink
every 2 seconds.
) will appear in the Extra
18
Hide quick links:
Advertisement
Table of Contents
