La Crosse M76171 - Color Weather Station Manual

POWER UP

1. Insert 2-AAA batteries into your Outdoor Sensor.
2. Insert the 5.0 volt USB power cord into an outlet, then into the side of your Weather Station. Optional: Insert 2-AAA batteries into your station.
3. Adjust time and date settings on the station.
4. Once the Outdoor Sensor is reading to your station, place it outside in a shaded location.

Watch our sensor mounting video: bit.ly/th_sensor_mounting

BACKLIGHT

Power Cord

• Hold the ON/OFF/BL button for 3 seconds, until the Station beeps, to turn the continuous Backlight OFF.
• Hold the ON/OFF/BL button again for 3 seconds, until the Station beeps, to turn continuous Backlight ON.
• When the Backlight is off, press any button to turn on the backlight for 8 seconds.

Batteries Only

Press any button to activate the backlight for 8 seconds.

SETTINGS

1. Press the SET/AL SET button so the word "TIME" shows in front of the time.
2. With the word "TIME" showing, hold the SET/AL SET button to enter the main Settings Menu.
3. Once the settings begin flashing, let go of the SET/AL SET button and use the ARROW buttons to adjust, and SET/AL SET to confirm or exit.

Settings Menu order

• 12/24 Hour Time • Hour • Minute • Year • Month • Date • Language

(ENG, GER, FRE, SPA, ITA, DUT, DAN)

Language

When another language is selected, the weekday and menu items will be presented in that language.

Weekday

Weekday sets automatically when Year, Month and Date are set.

FAHRENHEIT OR CELCIUS

Press the ºF/ºC button to select Fahrenheit or Celsius temperature display.

BAROMETRIC PRESSURE

View Pressure

Press the BARO button to view the Barometric Pressure in the time area.

Change Pressure Value

1. Hold the BARO button for 3 seconds to enter Bormetric Pressure Settings.
2. Use the ARROW buttons to adjust the value, then press the BARO button to save and exit.

ALARM

1. Press the SET/AL SET button so the word "ALARM" shows in front of the time.
2. With the word "ALARM" showing, hold the SET/AL SET button to enter Alarm Settings.
3. Use the ARROW buttons to adjust, and SET/AL SET to confirm and exit.

Alarm Menu order

• Hour
• Minute

Activate/Deactivate Alarm

Setting the alarm time and activating the alarm are separate actions.

1. Press the SET/AL SET button so the word "ALARM" shows in front of the time.
2. Use the ARROW buttons to turn the alarm ON or OFF. When the alarm is active the Alarm Icon will show.
   

Silence Alarm for 24-hours

• When the alarm sounds, press any button to silence the alarm for 24-hours.
• The Alarm Icon will continue to show.

MIN/MAX READINGS

The MIN/MAX readings are all time values from when the station was first powered on or last reset.

1. Press the MEM button to view indoor & outdoor MAX records.
2. Press MEM again to view MIN records.

Reset Records

1. Press the MEM button to view records.
2. Hold the MEM button to reset all Indoor and Outdoor records to current readings.

FORECAST ICONS

Five Forecast Icons use changing atmospheric pressure to predict your weather conditions to come within the next 12 hours.

SEARCH FOR OUTDOOR SENSOR

• If the sensor loses connection to the station for any reason, the station will show dashes after 3 minutes.
• To search for your Outdoor Sensor, hold the /CH button until the Reception Icon animates.
• When the sensor is connected, the Reception Icon will flash once when new signal is received.
• If your outdoor sensor is unable to reconnect on its own, a reset of your station may be necessary. Use a paper clip to press the RST button on the back of the station.

BUTTON FUNCTIONS

SET/AL SET	Press to select Time or Alarm Mode. Hold to enter Time or Alarm Settings.
	Press to view Sensor Channels or initiate the Auto-scroll feature. Settings Menu: Press to increase values. Alarm Menu: Press to activate/deactivate alarm. Hold to search for Outdoor Sensor.
MEM	Press to view indoor and outdoor MAX or MIN Records. Hold to reset MAX and MIN Records.
BARO	Press to view Barometric Pressure. Hold to set Pressure Value.
	Settings Menu: Press to decrease values. Alarm Menu: Press to activate/deactivate alarm.
ºF/ºC ON/OFF BL	Press to select Fahrenheit or Celsius Temperature Display. Hold to turn Backlight OFF. Hold again to turn Backlight ON.
RST	Press to Factory Reset Station

LOW BATTERY INDICATOR

• When the Battery Indicator shows next to the outdoor temperature, replace batteries in the Outdoor Sensor.
• When the Battery Indicator shows next to the indoor temperature, replace batteries in the Weather Station.

CHANNEL INDICATOR

• This station can show data for up to 3 remote sensors. The Channel Indicator will highlight which sensor data is being displayed.
• The Channel Number on the station should match the Channel selected on the sensor.
• The Auto-scroll Icon shows when the station cycles through all three channels. Press the /CH button to start or stop the auto-scroll.

Visit www.lacrossetechnology.com for add-on sensor availability.

SPECIFICATIONS

Weather Station M76171

Temperature Range: 140F to 1220F (-100C to 500C)

Humidity Range: 20% to 95% RH

Power Requirements: 5V/1A USB Power Cord (LX050100)

Optional: 2 "AAA" LR3 Batteries (not included)

Battery Life: Over 12 months with reputable batteries

Dimensions: 6.88" x 1.18" x 3.18" (17.5 cm x 3.0 cm x 8.1 cm)

Outdoor Sensor SH006T

Temperature Range: -40°F to 1400F (-40°C to 60°C)

Humidity Range: 20% to 95% RH

Transmission Range: Over 197 feet (60 meters) in open air RF 433MHz

Update Interval: About every 50 seconds

Power Requirements: 2 "AAA" LR3 Batteries (not included)

Battery Life: Over 12 months with reputable batteries

Dimensions: 4.72" x 0.79" x 1.77" (12.0 cm x 2.0 cm x 4.5 cm)

WE'RE HERE TO HELP!

If you require additional support, get in touch with our friendly customer support team based out of La Crosse, WI.

Phone: 1-608-782-1610

Online: bit.ly/contact_techsupport

Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.

JOIN THE CONVERSATION

Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!

WARRANTY INFO

This product is warranted to be free from defects in material and workmanship under normal use and service for a period of one year from the date of sale to the customer. Warranty will not apply to defects resulting from abuse, accidents, or misuse. If a defect that is covered by this warranty arises during the warranty period, promptly return the clock (postage prepaid) with proof of purchase showing the date the weather station was purchased to the following address and such defects will be repaired, or the products will be replaced at La Crosse Clock Company option without charge.

La Crosse Clock Company, Warranty Department, 2830 South 26^th Street., La Crosse, WI 54601

CARE + MAINTENANCE

• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.

This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov