Add Your Sensors To The - La Crosse CA79103/V11 Setup Manual

LA CROSSE VIEW
Add Your Sensors to the App
Upon getting the station connected to your Wi-Fi network, the next app
screen will explain how your connected sensor(s) should be brought
in. Within the next 15 minutes, you should receive an Add Device
notification in your app. This is indicated by the Red Cloud and the
numbers inside of it. Tap this icon to begin adding your sensor(s) into
the app.
ADD button: Press ADD to add the sensor to your app. Within 10
minutes each sensor reading will show on their own app page.
DISMISS button: Select DISMISS if you do not want the sensor to send
readings to your app.
Note: If DISMISS is selected, you can scan the barcode on your sensor
at any time to add it to your app if desired.
Instructions on scanning the barcode to add your sensor is on the next
page.
05