Summary of Contents for Pitney Bowes SendPro Network SendKit
Page 1
• A PC on which you have full admin rights to download and install software. • 2 available USB ports on your PC. If you have not received the email from Pitney Bowes, do not proceed. Visit pitneybowes.com for contact details for your area.
Page 2
1. Unpack your SendKit. Below is the contents you will find in the box. If you have any problems during this installation, refer to the ‘Troubleshooting’ section at the end of this guide. Scale Printer Power Cord Network Cable (not used for USB installation) 2. Sign-in to SendPro ® Visit and then sign-in to sending.ca.pitneybowes.com...
Page 3
4. Connect the scale. Place your scale on a firm, flat surface near your computer. Connect your scale to your computer using the USB cable supplied. Then press the Zero button. Hold Mode Zero Note: To connect your scale without using a USB cable, refer to Online help for battery installation. 5.
Page 4
10. Print the test label. 1. Use the Windows Search Box to open the Printers & scanners settings. 2. Select Pitney Bowes PB-SP100 and select Manage, then Select Print a test page. Check that your label has printed correctly. If you have any issues with the print refer to Troubleshoot later in this document.