Table of Contents
Advertisement
Quick Links
SendPro
Bluetooth SendKit
Installation Instruction
for Microsoft Windows OS Device
Read Now BEFORE you unpack your equipment
Continue reading below
Let's get your SendKit up and
running quickly...
Let's first get together the things you will need:
•
The box containing your SendPro
•
A Welcome Email from Pitney Bowes containing your SendPro
Login details, if you use SendPro for the first time.
•
A PC on which you have full admin rights to allow downloading
and installing software, if necessary.
•
2 available USB ports on your PC.
For the first time user:
If you have not received the email from Pitney Bowes, do not go
any further with this installation. Please visit pitneybowes.com for
contact details for your market.
®
Bluetooth SendKit.
®
®
Advertisement
Table of Contents
Related Manuals for Pitney Bowes SendPro Bluetooth SendKit
Summary of Contents for Pitney Bowes SendPro Bluetooth SendKit
- Page 1 • 2 available USB ports on your PC. For the first time user: If you have not received the email from Pitney Bowes, do not go any further with this installation. Please visit pitneybowes.com for contact details for your market.
- Page 2 1. Opening the box and unpacking. Here’s a diagram and explanation of the items you should find in your box. If you have any problems during this installation, refer to the ‘Troubleshooting’ section at the end of this guide. Printer Label Roll Power Cord (DK roll)
-
Page 3: Connecting The Power Cord
4. Connecting the scale. Place your scale on a firm and flat surface near to your computer. Connect your scale to your computer using the USB cable supplied. Then press the Zero button. Hold Mode Zero Note: If you do not wish to use a USB to connect your scale refer to the online help for information on battery installation. -
Page 4: Turning Power On
3. Thread the label roll straight through the printer, and align the edge of the roll with the upright edge of the output slot. Push the first label through the output slot until the end comes out of the slot as shown. If experiencing trouble loading the label roll, try inserting from the side making sure the label is under the sensor. - Page 5 9. Manually downloading the printer driver. 1. Ensure you are signed into SendPro® and click on the Help icon 2. Select the Brother Printer Driver (QL-1100), that is compatible with QL-1110NWB. 3. Click on download button for the Windows operating system.
- Page 6 Now let’s get shipping! You can access in-depth Online Help that covers all operator and feature aspects of your SendPro® software and SendKit in detail. To access this information, press the Help ( ) icon from your App. and select See More Help Topics. For your convenience, we’ve included links to most commonly needed support to get you started.
-
Page 7: Troubleshooting
2. If the error is not reset, press the Cutter Button. 3. If the error is not reset, turn off the Printer, and then turn it on again. 4. If the error is not reset, contact Pitney Bowes Customer Service. - Page 8 There is no need to use a battery if the scale is connected to the computer with a USB cable. If you’re still having trouble, then visit www.pitneybowes.com/us/bluetoothsendkit and select Support. *AW33166reva* AW33166 Rev. A 12/20 3001 Summer St. ©2020 Pitney Bowes Inc. Stamford, CT 06926 All Rights Reserved www.pitneybowes.com...